View SPM5001_134119.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN7330 www..com
SPM5001
RF Mixer MMIC
SPM5001
RF Double Balanced Mixer
Features
* * *
Package Dimensions
unit : mm 2211
[SPM5001]
0.25
* *
Wide band double balanced mixer. Low distortion. The chip surface is covered with highly reliable protection film. Automatic surface mounting is available. MCPH6 package.
0.3 4 5 6
0.15
2.1
1.6
0.25
32 0.65 2.0
0.07
1
6
5
4
(Bottom view)
0.85
1 : Gate1 2 : Drain1 3 : Drain2 4 : Source2 5 : Source1 6 : Gate2 SANYO : MCPH6
1
2
3
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current Allowable Power Dissipation Junction Temperature Storage Temperature Symbol VDS VGS ID PD Tj Tstg Conditions
(Top view)
Ratings 6 --4 60 200 150 --55 to +150
Unit V V mA mW C C
Electrical Characteristics at Ta=25C
Parameter Symbol IG1S1O Gate-to-Source Leakage Current IG2S1O IG2S2O IG1S2O ID1S1S Zero-Gate Voltage Drain Current ID2S1S ID1S2S ID2S2S VG1S1=--5V VG2S1=--5V VG2S2=--5V VG1S2=--5V VD1=3V, VG1S1=0, VG2=--4V VD2=3V, VG2S1=0, VG1=--4V VD1=3V, VG2S2=0, VG1=--4V VD2=3V, VG1S2=0, VG2=--4V 20 20 20 20 40 40 40 40 Conditions Ratings min typ max --10 --10 --10 --10 60 60 60 60 Unit A A A A mA mA mA mA
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
32603 TS IM TA-100360 No.7330-1/3
SPM5001
www..com Continued from preceding page.
Parameter Symbol VG1S1(off) Gate-to-Source Cutoff Voltage VG2S1(off) VG2S2(off) VG1S2(off) Conditions VD1=3V, ID=100A VD2=3V, ID=100A VD1=3V, ID=100A VD2=3V, ID=100A Ratings min --0.5 --0.5 --0.5 --0.5 typ --1.0 --1.0 --1.0 --1.0 max --1.5 --1.5 --1.5 --1.5 Unit V V V V
Equivalent Circuit
[Reference Data] Mixer Characteristics Measured by the Evaluation Board for SPM5001
Drain1 Drain2
Gate1 Gate2 Source2 Source1
Chip capacitor Balun transformer
20
3rd Order Intermodulation Distortion
VD=3V, ID=6mA(LO off) IIP3(LO=0dBm)=16.7dBm f(RF1)=880MHz IIP3(LO= --3dBm)=13.6dBm f(RF2)=881MHz f(LO)=965MHz m m dB dB =0 --3 LO O= L
LO= -LO= 3dBm 0dB m
20
3rd Order Intermodulation Distortion
VD=3V, ID=6mA(LO off) IIP3(LO=0dBm)=21.2dBm f(RF1)=1960MHz IIP3(LO= --3dBm)=21.0dBm f(RF2)=1961MHz f(LO)=1750MHz
Bm dBm --3 = LO
LO LO= =0dBm --3d Bm
--80 --60 --40 --20 0
0
0
Output Power -- dBm
Output Power -- dBm
--20
--20
--40
--40
= LO
0d
--60
--60
--80
--80
--100 --120 --100
--100 --100
--80
--60
--40
--20
0
20
40 IT04675
20
40 IT04676
RF Power@1 Tone -- dBm
13
RF Power@1 Tone -- dBm
10
Total Current vs. RF Power
VD=3V, ID=6mA(LO off) f(RF)=1960MHz f(LO)=1750MHz
Conversion Loss*
VD=3V, ID=4mA(LO off) f(RF)=488MHz f(LO)=443.15MHz f(IF)=44.85MHz Power(RF)= --20dBm
12
9
Total Current -- mA
11
8
10
LC -- dB
7
9
Lo=0dBm
6
8
5
Lo= --3dBm
7 --100 --80 --60 --40 --20 0 20 IT04677 4 --15 --10 --5 0 5 10 15
RF Power -- dBm
IT05339 LO Power -- dBm * This Conversion Loss characteristic includes the loss of the test board and the Balun Transformer.
No.7330-2/3
SPM5001
www..com
Measurement System * IF output power vs. RF input power
RF Signal Generator Bias Tee Bias Tee IF Spectrum Analyzer
Vd
Signal Generator
LO Bias Tee
Vg
*
IM3, IM2 vs. RF input power
Signal Generator1 RF Bias Tee Bias Tee Signal Generator2 Vd IF Spectrum Analyzer
Signal Generator
LO Bias Tee
Vg
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2003. Specifications and information herein are subject to change without notice.
PS No.7330-3/3

▲Up To Search▲

Price & Availability of SPM5001

	To Download SPM5001 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .